What this conversion means in practice
Consumer electronics quote peak g; physics homework wants m/s². This page uses g₀ = 9.80665 m/s² to match the main acceleration converter.
The exact relationship here is 1 g = 9.80665 m/s², consistent with expressing both units relative to meters per square second (m/s²).
How to convert standard gravity (g) to meter per square second
Multiply the standard gravity (g) value by 9.80665 to get meter per square second.
Example: 1 g × 9.80665 = 9.80665 m/s².
Standard gravity (g) and Meter per square second
This focused page locks to the unit pair above so you can quote or audit one factor without scrolling the full dropdown list. For context on other rows, open the parent converter from the site navigation.
Standard gravity (g) to Meter per square second conversion table
| Standard gravity (g) (g) | Meter per square second (m/s²) |
|---|---|
| 0.1 g | 0.980665 m/s² |
| 1 g | 9.80665 m/s² |
| 2 g | 19.6133 m/s² |
| 5 g | 49.03325 m/s² |
| 10 g | 98.0665 m/s² |
| 20 g | 196.133 m/s² |
| 50 g | 490.3325 m/s² |
| 100 g | 980.665 m/s² |
Standard gravity (g) to Meter per square second FAQ
g to m/s² for crash testing, HDD shock specs, and IMU calibration chatter.
How do I convert g to m/s²?
Multiply the value in g by 9.80665 to obtain m/s². That factor is the ratio of the two units in the same base system as the site’s full converter.
Is this factor the same as the main converter tool?
Yes. The numeric relationship uses the same unit definitions and base normalization as the corresponding converter on CalcRegistry.
Why might my hand calculation differ slightly?
Rounding after intermediate steps, display precision limits, or mixing alternate definitions (for example different “horsepower” variants) can shift the last digits. Use this page’s factor end-to-end for consistency.